HOMEOWNER TIPS
Keep your yard running smoothly.
Simple habits for efficient watering and dependable landscape lighting. Expand a tip for practical guidance.
12 irrigation tips
1. Water early in the morning
Cooler temperatures and lighter winds help keep water where it belongs. Follow local watering restrictions.
2. Adjust the schedule with the seasons
Reduce watering as temperatures cool. Account for rainfall instead of leaving the same program running year-round.
3. Set each zone for its needs
Sun, shade, plant type, and sprinkler type affect watering. Avoid giving every zone identical run times.
4. Measure your sprinkler output
Place shallow containers around a zone and compare collected water. Use the results to set run times and spot uneven coverage.
5. Use cycle-and-soak when water runs off
Split watering into shorter cycles with pauses between them so soil can absorb the water.
6. Check every zone monthly
Run zones while you watch. Flag heads that leak, tilt, fail to pop up, or spray unevenly.
7. Keep spray on the landscape
Adjust heads that water sidewalks, driveways, or walls. Clear grass and debris that block the spray.
8. Investigate persistent wet spots
Pooling between cycles may indicate a leaking pipe or valve. Arrange service rather than increasing watering to compensate.
9. Watch for misting
A fine mist can signal excessive pressure. Ask about pressure regulation rather than extending the run time.
10. Maintain drip filters and emitters
Clean filters according to the manufacturer’s instructions. Check for clogged emitters and disconnected tubing.
11. Consider a smart controller
A properly configured weather- or soil-moisture-based controller can reduce unnecessary watering. Check settings and sensor operation regularly.
12. Plan ahead for freezing weather
Ask a professional how your system and backflow equipment should be winterized. Compressed-air blowouts require proper equipment and care.
6 landscape lighting tips
1. Walk the yard after dark
Check for failed lamps, dark paths, and shifted fixtures. Note the affected lights before requesting service.
2. Keep lenses clear
Turn lights off and let them cool before cleaning. Remove leaves and debris; use cleaning methods approved for your fixture.
3. Trim plants around fixtures
Growing shrubs can block light. Maintain clearance and review placement as the landscape matures.
4. Review aiming and alignment
Straighten path lights and check beam direction. Keep light on paths and landscape features rather than neighboring windows.
5. Check timers and daylight sensors
Confirm on/off schedules after seasonal changes or power outages. Keep photocells unobstructed and follow your controller’s instructions.
6. Use compatible parts and protect wiring
Match replacement lamps to fixture specifications. Have damaged cables, exposed connections, and transformer problems checked by a qualified professional.
More guidance: EPA watering tips · Sprinkler maintenance · Winterization · Lighting maintenance
